Realtek Pcie Fe Family Controller Driver Error

Fix Realtek PCIe GBE Family Controller adapter is experiencing driver issue: The above problem is caused mainly because of the corrupted or outdated drivers which are conflicting with Windows.As the error message clearly states it’s experiencing driver issues, so we need to identify which drivers are creating this conflict and resolved them.

  1. Realtek PCIe FE GBE Family Controller Series Driver is licensed as freeware for PC or laptop with Windows 32 bit and 64 bit operating system without restrictions. It is in soundcard category and is available to all software users as a free download.
  2. If you want to download and install Realtek PCIe FE Family Controller Drivers in Windows 7, refer steps here, then drivers will be updated.
  3. Step 3: Within the list of Device Manager, expand category Network adapters, Under this category, right-click on the Realtek PCIe GBE Family Controller Windows 10. Then click Uninstall. Step 4: A window will pop-up asking your confirmation to uninstall the device. So Click on OK. Step 5: From here you can choose the Manual Mode.The Manual Mode helps you pick your own drivers and lets you.

Realtek Pcie Fe Family Controller Driver Error Codes

Realtek PCIe GBE Family Controller is disconnected from network. This sounds like a Realtek driver that does not work correctly. A driver can no longer function properly after a system update.

In Device Manager, you will see a yellow exclamation mark next to Realtek PCIe GBE Family Controller which means Windows has failed to load this driver. This error will probably stop internet connection on your PC which will ultimately result in a bigger problem.

Now we have talked about the software part but this error can also be caused by hardware problems. The Realtek PCIe GBE Family Controller is a LAN driver which means if you are facing this error then you’re LAN card may be dead. Anyway, let’s see how to troubleshoot this problem without wasting any time.

Fix Realtek PCIe GBE Family Controller adapter is experiencing driver issue

It’s recommended to create a system restore point before making any changes to your system.


Method 1: Manually download the driver from Realtek Website

1.As you won’t be able to use the Internet, it’s recommended you use another PC to open up the web browser.

2.Next, navigate to this link in the web browser:

3.Find your Operating System and click the Download link beside it.

4.Now go to the PC which is giving the error and run the setup file.

5.Follow the on-screen instruction to install the file and reboot your PC to save changes.

The above method may be able to Fix Realtek PCIe GBE Family Controller adapter is experiencing driver issue but in case you are still experiencing this issue then continue to next method.

Method 2: Try to Restore you System to working condition

To Fix Realtek PCIe GBE Family Controller adapter is experiencing driver issue you may need to Restore your computer to an earlier working time using System Restore.

Method 3: Uninstall the Problematic Driver

1.Press Windows Key + R then type “devmgmt.msc” (without quotes) and hit enter to open Device Manager.

2.Expand Network Adapter and right-click on Realtek PCIe GBE Family Controller.

3.Next, select Uninstall and if ask for confirmation select Yes.

4.Now unplug the ethernet cable and again plug it, so that windows automatically installs the drivers. A restart is also recommended to save these changes.

5.If you can’t uninstall it then disable and again enable it.

6.If you can’t do any of the above things right-click and select properties.

7.Now see if you can Roll back the drivers.

8.Restart your PC to save changes and see if you’re able to Fix Realtek PCIe GBE Family Controller adapter is experiencing driver issue.

Method 4: Manually install the Realtek drivers

1.Press Windows Key + R then type “devmgmt.msc” (without quotes) and hit enter to open Device Manager.

2.Expand Network Adapter and right-click on Realtek PCIe GBE Family Controller then select Update Driver Software.

Hp Realtek Pcie Fe Family Controller Download

3.Now select “Search automatically for updated driver software” and let the process finish.

4.If it wasn’t able to update your graphic card then again select Update Driver Software.

5.This time select “Browse my computer for driver software.

6.Next, select “Let me pick from a list of device drivers on my computer.

7.Select the appropriate driver from the list and click Next.

8.Let the process complete and then restart your PC.

9.Alternatively, go to your manufacturer’s website and download the latest drivers.

If you are still not able to fix the error then, unfortunately, it means that your network adapter is dead. The only possible solution in case of a hardware failure is to replace it with a new one. But don’t worry PCIe network adapters cost is fairly cheap but again you will need the help of an expert/technician which can replace the network adapter card. If you don’t prefer this then you can always buy a USB Wifi Adapter and again connect to the internet via wireless.

That’s it you have successfully Fix Realtek PCIe GBE Family Controller adapter is experiencing driver issue but if you still have any question regarding this post feel free to ask them in the comment’s section.

Facebook Comments

HI Byeong,

To assist you better I would appreciate if you could answer the following questions:

1)Is it a custom installation or clean installation?

2)What is the status of the Device in the “Device Manager”?

Open Start, click on Run, type devmgmt.msc to and click Enter open the Device Manager. Check if you see any error message.

This is due to the compatibility issues

The Code 10 error pertains mainly to hardware and device driver issues or to compatibility issues between hardware drivers and additional software that is installed in Windows. Therefore, we recommend that you troubleshoot these issues by focusing on device drivers, on device configuration issues, and on hardware compatibility issues.

Run Windows Update to obtain the latest fixes for Windows. When this is complete, plug in the device to see whether it is installed correctly.

Method 1: Run the Hardware and Devices troubleshooter and check.

Follow the steps to run the troubleshooter:

a)Press Windows key + W on your keyboard.

b)Type Troubleshooting and click Troubleshooting.

c)Click on View All.

d)Click on Hardware and Devices Troubleshooter.

e)Click on Next button to run the troubleshooter.

Method 2:I would suggest you to uninstall and reinstall the drivers in compatibility mode from the Manufacturer’s website and check.

Refer the link to download the drivers;

Note: Download the drivers from the Manufacturer’s website and save it on to the Desktop.

Follow the steps to uninstall the drivers;

a)Press Windows Key + R, type devmgmt.msc.

b)Expand the Network Adapter.

c)Right click on the Wireless LAN and click on Uninstall.

d)Click OK.

e)Right-click on the driver (Downloaded from the manufacturer’s website) file.

f)Click on Properties and select the Compatibility tab.

g)Click the checkbox before Run this program in Compatibility mode for option and select Windows 7.

h)In the list-down box; then try installing the device driver via Run as administrator.

Make older programs compatible with this version of Windows

Most programs created for earlier versions of Windows also work in this version of Windows, but some older programs might run poorly or not at all. If a program written for an earlier version of Windows doesn't work correctly, you can try changing the compatibility settings for the program, either by using the Program Compatibility Troubleshooter or manually choosing compatibility settings.

What is program compatibility?

You can also refer to the article mentioned below for more information.

Why isn't Windows finding my device?

What if a device isn't installed properly?

If you need further assistance regarding Windows, please feel free to post. We will be happy to help you.